Yes. The DJI Mini 5 Pro has a built-in Standard Remote ID system that meets the FAA's Part 89 rules, and it appears on the FAA's list of accepted Remote ID declarations of compliance. DJI's manual says it broadcasts from takeoff to shutdown. With the standard battery the drone weighs about 249.9 g, so recreational flyers don't need to register it or meet Remote ID rules; with the Battery Plus or under Part 107, you register it and add its serial number in FAADroneZone.
When Remote ID applies
| How you fly | Registration | Remote ID |
|---|---|---|
| For fun, standard battery (about 249.9 g) | Not required | Not required |
| For fun, Battery Plus (over 250 g) | Required | Required; built in |
| Part 107, any battery | Required | Required; built in |
Unlike the Mini 4 Pro, whose manual says its Remote ID only activates with the Battery Plus, the Mini 5 Pro's manual has no such limit. That makes Part 107 work simpler: the built-in broadcast covers you with either battery. See Remote ID explained.
Where to find the Mini 5 Pro serial number
- DJI Fly: with the drone connected, open the settings menu and go to About. The aircraft serial number (SN) is listed there with the model and firmware versions.
- The box: the packaging label lists the serial number.
- Don't mix them up: the controller and each battery have their own serials. Use the aircraft's for the FAA.
How to add it to FAADroneZone
- Log in to FAADroneZone at faadronezone-access.faa.gov.
- Recreational: add the Mini 5 Pro to your recreational inventory with its serial number. One registration number covers all your recreational drones.
- Part 107: register the Mini 5 Pro as its own drone and enter the serial number.
- Pay $5 if it's a new registration. It's valid for 3 years.
- Mark your FAA registration number on the outside of the drone.
More in FAA registration.
How the built-in Remote ID works
From DJI's FAR Remote ID compliance information for the Mini 5 Pro:
- It broadcasts automatically from takeoff to shutdown.
- It runs a pre-flight self-test and the drone can't take off if the test fails. Results show in DJI Fly.
- It monitors itself during flight and shows an alarm in DJI Fly if something fails.
- With the RC-N3 (no GNSS of its own), your phone supplies your location. DJI Fly must stay in the foreground with precise location allowed. The DJI RC 2 has built-in GNSS.
"No Remote ID" or Remote ID errors
If DJI Fly shows a Remote ID warning or the drone won't take off:
- On the RC-N3, check your phone's location permission for DJI Fly is set to precise and always allowed while in use.
- Keep DJI Fly in the foreground; switching apps can break the location feed.
- Restart the drone, controller and app.
- Update the aircraft and controller firmware.
Still failing? See DJI Remote ID error, or contact our repair team.
The registration field in DJI Fly
DJI's manual describes entering a UAS operator registration number in DJI Fly under Safety > UAS Remote Identification. That's part of its European C0/C1 compliance section. In the US, the FAA links your registration to the drone's serial number in FAADroneZone, and the drone's Standard Remote ID broadcasts on its own.
Rules current as of October 2026. This is general information, not legal advice.
Not sure you need to register? Read Mini 5 Pro license. Shop the DJI Mini 5 Pro.
Related guides
- Does the DJI Mini 4 Pro have Remote ID? Serial number and FAA registration
- Does the DJI Flip have Remote ID? Serial number and FAA registration
- Does the DJI Mavic 3 Pro have Remote ID? Serial number and FAA registration
- Does the DJI Mavic 4 Pro have Remote ID? Serial number and FAA registration
- Does the DJI Mini 3 have Remote ID? Serial number and FAA registration
- Does the DJI Air 3 have Remote ID? Serial number and FAA registration
Not sure which to pick?
Tell us what you'll fly and your budget. One of our drone pilots will reply with a recommendation.
Buying drones for a business, agency or store? Get wholesale pricing →
