The best action camera settings for FPV are 4K or 2.7K in the tallest aspect ratio your camera offers (4:3 or taller), 50 or 60 fps, in-camera stabilization off, and the widest field of view, so you can stabilize later in Gyroflow. Fix white balance around 5500K in daylight, keep ISO low, and use an ND filter if you want motion blur. This works for GoPro, DJI Osmo Action and similar cameras.
Recommended settings
| Setting | FPV recommendation | Why |
|---|---|---|
| Resolution | 4K, or 2.7K for smaller files | Extra pixels survive Gyroflow cropping |
| Aspect ratio | 4:3 (or taller, if available) | More frame to stabilize and reframe |
| Frame rate | 50 or 60 fps | Smooth motion, room to slow down |
| Stabilization | Off | Gyroflow does it better with raw footage |
| Field of view | Widest | Needed for accurate gyro stabilization |
| Color | Flat or log, 10-bit | More grading room |
| White balance | Fixed, about 5500K | Stops color shifts as you fly |
| ISO | Low max, 100 to 400 | Less noise in shadows |
| Shutter | Auto, or double the frame rate with ND | See below |
| Sharpness | Low | Looks more natural, sharpen in post |
Stabilization: off for Gyroflow
Most modern action cameras record gyro data in the file. Gyroflow reads it and stabilizes on your computer, where you control smoothness, crop and horizon lock. To make this work:
- Turn in-camera stabilization off.
- Use the widest field of view.
DJI spells this out for the Osmo Action 5 Pro: to record videos with gyro data, disable EIS and set the camera FOV to Wide. GoPro cameras have their own equivalent settings; check your model's manual. If you'd rather post straight from the camera, leave stabilization on and accept some crop.
Shutter speed and ND filters
You have two choices:
- Auto shutter, no ND. Every frame is sharp. Fine for most freestyle, but fast footage can look choppy.
- Locked shutter with ND. Shutter about double the frame rate, so 1/120 s at 60 fps. In bright sun this needs roughly ND16 to ND32. It gives natural motion blur and hides some vibration.
Gyroflow can't remove blur baked into a frame, so don't go slower than double the frame rate. More on filter strengths in ND filter numbers explained.
Osmo Action 5 Pro settings for FPV
The DJI Osmo Action 5 Pro has a 1/1.3-inch sensor, a 155° lens and 4K 4:3 recording up to 120 fps.
- Video: 4K 4:3 at 50 or 60 fps (100 or 120 fps for slow motion).
- EIS: off. FOV: Wide.
- Color: D-Log M 10-bit for grading, or Normal 10-bit. Turn on Color Recovery to preview log footage normally.
- Exposure: Pro mode, manual ISO and shutter if you use ND.
DJI provides a free Action 5 Pro D-Log M to Rec.709 LUT; see Osmo Action 5 Pro LUTs. For workflow details, read Osmo Action 5 Pro with Gyroflow and timecode.
Mounting tips
- Weight matters. The Action 5 Pro weighs 146 g. Small quads may fly worse with a full-size action camera; lighter cameras suit them better.
- Soft-mount or use a TPU mount to cut vibration and jello.
- Angle the camera to match your FPV camera tilt so footage looks level in forward flight.
- Balance props and replace damaged ones before blaming camera settings.
Editing
Stabilize in Gyroflow first, then grade and cut. See edit FPV footage with Gyroflow. If you'd rather skip the separate camera, DJI's FPV drones record stabilized 4K themselves.
New to FPV? Read how to fly an FPV drone, or shop the Osmo Action 5 Pro.
Related guides
- DJI vs GoPro: which action camera brand should you buy?
- Do you need a gimbal for an action camera or GoPro?
- Best action camera for motorcycle and bike rides (helmet, chest and bar mounts)
- Best Osmo Action 5 Pro settings (cinematic, low light, timelapse)
- Can you put a GoPro or Osmo Action on the Osmo Mobile 6?
- Diving and snorkeling with the Osmo Action 5 Pro (case, settings)
Not sure which to pick?
Tell us what you'll fly and your budget. One of our drone pilots will reply with a recommendation.
Buying drones for a business, agency or store? Get wholesale pricing →
